Autodesk® Only Available Online

Autodesk^® Revit^® 2019

Resolved Reported Issues and Improvements in Revit 2019

These lists represent the resolved reported issues and improvements included in the Autodesk Revit 2019 product line within build: 20180216_1515.

Resolved Issues (Listed based upon discipline and feature)
- Platform
  - Annotation
    - Fixed an issue in which tags unintentionally moved when a link was reloaded.
    - Fixed an issue in which tags were moved when a link was reloaded.
    - Fixed an issue causing superscript characters to display incorrectly in some Windows OS locales.
    - Improved stability when canceling in-canvas dimensions and tag controls.
    - Fixed an issue causing some fonts to overlap when using a Windows 7 operating system.
    - Fixed an issue so that text for right to left languages appear correctly.
    - Fixed an issue so that special text characters in the Latvian Windows locale display correctly.
    - Fixed an issue causing some fonts to display differently between Windows 7 and Windows 10.
    - Fixed an issue that caused underlined small font to display incorrectly.
    - Fixed an issue causing image files to incorrectly mask label text.
    - Removed the Model Groups category from the Load Tags & Symbols dialog.
    - Improved stability when placing spot elevations.
    - Fixed an issue so that the Find/Replace tool and the Check Spelling tool display in the ribbon when multiple text notes are selected.
    - Improved stability when using temporary UI controls in an active viewport on a sheet.
  - BIM 360 Design
    - Fixed an issue that could cause DWG file link paths to be corrupted when collaboration for Revit is initiated.
    - Improved stability when loading larger files or working across a slow network connection.
    - Improved messaging at the start of the initiate collaboration process.
    - Improved stability when reloading latest if the active viewport has been deleted by another user.
    - Improved stability when user signs out of Autodesk A360 and then attempts to sync with central.
    - Improved publish operation efficiency and stability by reducing nested link data sets size and removing globally unloaded link data.
  - Color Fill
    - Fixed an issue that could affect the display of pipes that are connected by taps when using a system color fill scheme.
    - Improved stability when editing a color scheme.
    - Fixed an issue that could cause an incorrect result when using a color fill scheme set to By range.
    - Fixed an issue that could cause color scheme data to change unexpectedly when editing.
  - Copy/Monitor
    - Improved stability when interacting with the type selector and then completing Copy/Monitor.
  - Copy-Cut-Paste
    - Improved stability in 3D views when canceling out of Edit Pasted Elements mode.
    - Improved behavior of copy-paste to reduce errors when binding links.
    - Improved the stability of copy-paste when used with bind link workflows.
  - Crash Protection
    - Fixed an issue that could stop Revit from saving a recovery file in the event of an error.
  - Dimension
    - Improved stability when activating auto-dimension and selecting a split edge in the wall preview dialog.
    - Improved stability when adjusting the temporary dimension witness line during the creation of doors.
  - DirectShape Elements
    - DirectShape element geometry now correctly changes material when associated with the base object style of the Direct Shape is changed. This affects some imported 3D data.
  - eTransmit
    - Fixed an issue in which incorrect information displayed under Saved Path in the Manage Links dialog when opening a dataset from eTransmit.
  - Export
    - Fixed an issue in which exporting sheets with section views to DWG could result in blocks being incorrectly positioned in the DWG file.
    - Improved stability when cancelling a DWF Export.
  - Families
    - Improved the stability of project files when copy-pasting families across documents.
    - Improved stability when loading an empty Family Types text file.
    - Improved stability when editing a curtain panel family.
    - Fixed an issue in instances of shared nested families where the nesting is more than one level deep.
    - Improved stability when modifying a nested family in Family Editor.
    - Improved stability when selecting levels with families which contain a stale ID.
  - File Corruption
    - Fixed an issue that resulted in missing elements with imported images.
    - Improved stability when upgrading a model.
  - File Open/Save
    - Improved stability when loading a family.
    - Fixed an issue that could cause unresolved pointer references errors when opening files.
    - Improved the messaging when the operating system ran out of resources that lead to erratic behavior in Revit.
    - Improved stability when encountering a corrupt file.
    - Improved the user experience when opening a C4R model that is corrupted.
    - Fixed an issue that could cause files and folder to be displayed in an incorrect order after selecting the BIM 360 location in the Open dialog.
    - Improved stability when saving models immediately after upgrading a Revit 2017 project.
    - Improved stability when the pointer pUser of Sketch is null.
    - Improved family loading by remembering the location of the last family loaded into the project.
  - Graphics
    - Improved stability when the option "Use Optimized View Navigation" is enabled.
    - Improved stability with transparent filled regions in Reflected Ceiling Plans
    - Fixed an issue in which new or modified line styles were not updating in the Line Style list for the Linework tool.
    - Fixed an issue that could cause gradient background to disappear in views cropped with a non-rectangular crop region when placed on a sheet, while depth cueing is enabled for that view.
    - Improved stability when rendering images with low-memory video cards.
  - IFC
    - Improved exporting of areas with short line segments in their boundaries to an IFC file.
    - Corrected the name of two IFC4 properties on export.
    - Fixed an issue with the placement of some objects with mirrored transforms on Link IFC.
    - Allows Revit families to maintain correct positions when Revit files are exported to IFC.
    - Improved the visualization of some trimmed imported or linked IFC geometry.
    - Added the ability to link IFC files in cloud-based models used with Collaboration for Revit.
    - Improved the behavior of the Open IFC tool for some objects with slightly invalid geometry.
    - Fixed an issue in which DirectShapes of the Structural Framing category were not checked by the Interference Check tool.
  - Import/Export/Link SAT/SKP
    - Added the ability to import SAT and Rhino geometry into baluster families.
    - Improved SAT and Rhino import to allow greater success in importing objects with complex geometry.
  - Import/Export/Link DWG/DXF
    - Improved stability when importing CAD files with geometry that is located more than 1 billion feet away from the origin.
    - Improved the import of some DWG files with proxy graphics that are far away from the origin.
    - Fixed an issue that could occur when importing DWG files with periodic spline curves.
    - Fixed an issue on DWFx export from very wide Revit sheet views, the resulting DWFx file now opens successfully.
    - Fixed an issue when exporting multiple views to individual DWF files resulted in failed creation of certain views.
  - In-Place Families
    - Improved stability when editing an in-place component and modifying a view placed on a sheet.
    - Improved stability when copying and pasting in-place families, which could lead to file corruption.
    - Improved stability when associating family parameters to global parameters for in-place families.
  - Keynote
    - Improved stability when creating a keynote legend in a model containing document corruption.
    - Improved consistency for keynotes when the numbering method is set to By Sheet and elements exist above the view cut plane.
    - Regenerates keynote legends at the time of print or export operations to improve the accuracy of keynotes near the crop region boundary.
  - Linked Files
    - Improved stability when a local workshared model is linked and then reloaded from Revit Server.
    - Fixed an issue causing inaccurate length parameter for parts created for walls that are in a rotated linked model.
  - Mass
    - Improved stability when adding an edge to a mass while a point cloud is loaded in the view.
    - Improved stability when inserting a Revit link containing invalid or missing phase data.
  - Materials
    - Improved stability when quickly double-clicking on the OK button on the Material Browser.
    - Fixed an issue with displaying the correct preview for material appearance.
    - Improved stability when replacing a material texture.
    - Improved stability when editing materials.
    - Corrected the behavior of the materials browser when opened for the first time and the properties tabs were not expanded.
    - Improved stability when using the Material Browser to edit materials.
    - Fixed an issue to allows patterns to be set in the Materials dialog when the project included multiple solid fill patterns.
    - Fixed an issue on the Materials dialog with tab labels that were not translated to the localized language version.
  - Phasing
    - Improved stability when placing or modifying a room in a model that contains invalid phase information.
  - Print
    - Improved stability for Print and Export to DWF.
    - Fixed an issue where a solid fill for a element that had all sketch lines exactly coincident with a wall edge did not print in vector.
    - Fixed an issue where polymeshes (such as topography and RPC content) lose color when printing in Consistent Color mode.
    - Fixed a printing problem causing the last line of text to be cut off in some situations.
    - Fixed an issue with the Print Setup dialog so that work planes print as expected when the option 'Hide ref/work planes' is cleared.
    - Fixed an issue in which the Print dialog became disabled when choosing the Print to PDF print driver with Windows 10 anniversary edition.
  - Rendering
    - Fixed an issue that could occur when cloud rendering with a local language.
    - Fixed an issue to improve stability when rendering.
    - Improved stability when editing render settings.
    - Fixed an issue with the image file size rendering on the cloud when using the highest setting.
  - Schedules
    - Improved stability when using the Highlight in Model tool in a conduit run schedule.
    - Improved stability when upgrading the parameter ROOM_SPACE_TYPE_PARAM integer type to ElementId type.
    - Fixed an issue that prevented shared parameter data from appearing on nested links in a Revit link schedule.
    - Improve stability when exporting a schedule.
    - Improved stability when editing a schedule.
    - Fixed an issue that could cause Revit to become unresponsive when trying to close a view using the close system button from a schedule view.
  - Shared Coordinates
    - Improved results when linking multiple instances of a Revit project with geolocation and shared positioning is disabled.
    - Corrected a grammatical error in the Coordinate System Is Already In Use dialog.
  - Sign In/Sign Out
    - Improved stability when quickly signing out of A360 and closing Revit.
  - Site
    - Improved stability when editing a toposurface and adding new points.
  - Sketching
    - Fixed a crash that occurred when editing multi-segment grids.
  - Startup/Save
    - Improved stability when launching Revit as a restricted Windows user.
    - Implemented better error handling to improve stability related to the Revit UI state.
    - Fixed an issue that could cause instability in Revit when there is an interaction during startup.
    - Fixed an issue that could stop Revit from saving a recovery file in the event of an error.
  - User Interface
    - Fixed an issue with the Switch Windows tool that prevented windows from properly displaying and activating.
    - Fixed an issue that caused instability when moving a palette or browser in Revit after applying the Windows 10 x64 Fall Creator update.
    - Improved icon visibility on the Quick Access Toolbar in a dark theme.
    - Improved stability when modifying the dimensions of a wall.
    - Fixed an issue that caused the in-canvas right click menu to open in a location away from the cursor.
    - Fixed an issue that caused the right click menu for the preview window of the Publish Settings dialog to open in a location away from the cursor.
    - Fixed an issue with the display of the Options dialog when using Revit on a monitor with high DPI settings.
    - Fixed an issue in which some families have no check box in the Purge Unused dialog.
    - Improved stability when clicking context menu items in the View Cube while the Steering Wheel is on.
    - Fixed an issue in which ribbon menus disappeared after performing a print preview.
    - Fixed an issue so that reference planes correctly hide and reveal based on By Category Visibility/Graphics settings.
  - Views
    - Fixed an issue that occurred when assigning a scope box to a view, in which the Crop View property was not correctly disabled.
    - Improved stability when a sheet viewport is active as the latest file is reloaded and the active view has been deleted by another user.
    - Fixed an issue with transparent room color fill in overlapping views on sheets with an edited crop region shape.
    - Improved stability when a view filter included analytic or space categories and the energy analysis tools are disabled in the user interface.
    - Improved stability when reloading an active view that was deleted by another user.
  - View Templates
    - Fixed an issue so that view templates remain assigned to views after syncing with the central model.
    - Fixed an issue causing background images to not update with view templates.
  - Worksharing
    - Prevents use of the Sync with Central command until background model calculations are complete.
    - Fixes an issue in the Synchronize with Central operation that mistakenly reports the model is corrupted.
    - Improved stability in workshared files containing sun and shadow settings saved in view templates.
- Architecture
  - Area
    - Fixed an issue where modifying room elements would unnecessarily check out the 'Area and Volume Computations' workset.
  - Ceiling
    - Fixed an issue in which the Auto-Ceiling tool highlighted a boundary but was not able to place a ceiling.
  - Floor
    - Improved stability when creating a new section view in an RVT file.
    - Improved stability when setting the thickness of a floor to 0 when using the floor preview dialog.
    - Improved stability when using the Pick Line tool.
  - Railing
    - Fixed an issue with a section box incorrectly cutting a mirrored baluster.
    - Fixed an issue with the incorrect positioning of an element when using flip controls on stair railings.
  - Stair
    - Improved stability when upgrading files with multistory stairs.
    - Fixed an issue issue in which removing a group of stairs in Multistory Stairs failed to recreate them again by connecting the levels.
    - Fixed an issue when changing monolithic landing thickness that generated the error: "Can't make stair."
    - Improved stability when connecting levels to create Multistory Stair by Monolithic and Precast stair types.
    - Improved stability when disconnecting a precast/cast-in-place multi-story stair.
    - The change is to localize tooltips on stairs creation.
  - Wall
    - Improved stability when deleting a wall element.
    - Fixed an issue so that wall core edges can be referenced when using the Pick Lines sketch tool.
- MEP
  - Analytical Duct/Pipe Connections
    - Fixed an issue that caused systems to be removed or assigned improperly when using analytical pipe connections to connect network components.
    - Fixed an issue that could cause the calculated pressure drop of the network to change when stretching an analytical pipe connection whose pressure drop is set to zero.
    - Improved analytical pipe connections by maintaining their connection to pipes when using the Change Type or Reapply Type commands.
    - Fixed an issue that caused Pressure Loss reports to fail to generate when the system included analytical pipe connections.
    - Disabled the OK button on the Select Connectors dialog for analytical pipe connections if no connectors are selected.
    - Fixed an issue that could cause a crash when analytically connecting two pipes to the same mechanical equipment connector.
  - Conduit
    - Improved stability when editing conduit elements.
    - Improved stability when editing conduit to connect conduit surface connector.
  - Duct/Pipe
    - Improved stability when editing pipe elements that are members of a group.
    - Improved stability when copying a pipe using Ctrl+Click+Drag.
    - Fixed an issue that could cause instability when modifying the size of a set of pipe or duct elements.
    - Improved stability when editing size of pipe or duct elements in the Options bar.
    - Improved stability when selecting the drag control of a duct connector.
  - Duct/Pipe Pressure Loss Calculations
    - Improved stability when trying to add an analytical connection from a previously occupied pipe connector on a mechanical equipment family.
    - Fixed an issue that could cause equipment using the Pump classification to display an incorrect pressure loss value in the pressure loss report.
    - Fixed an issue in the pressure loss report that caused an incorrect total pressure loss to display for the critical path.
    - Improved the time of the first flow/pressure background calculation after opening the project file so it is about the same as consequential calculations.
  - Electrical
    - Improved a performance issue that occurs when working with a panel which has a large Max #1 Pole Breakers value.
    - Improved stability when changing a electrical circuit frame value.
    - Fixed an issue with displaying the circuit path offset value in the drawing area after switching views.
    - Improved stability when selecting electrical wires.
    - Fixed an issue when attempting to add a temperature to the correction factor for wire sizes in the Electrical Settings dialog.
  - Fabrication
    - Improved CID pattern 64 to support shape changes on the branch connector for ductwork.
    - Improved stability when loading services for fabrication configurations.
    - Improved the snap accuracy when picking end points on stacks while using the Multi-Point Routing tool.
    - Improved the Route and Fill feature by filtering out duplicate solutions.
    - Fixed an issue that prevented round taps from filtering to the host size when using the Product Entry drop down in the Properties pallete.
    - Fixed an issue that resulted in unwanted propagation when moving sloped fittings that are not perfectly aligned.
    - Fixed an issue that occasionally caused pipe insulation to be removed from assemblies when reloading a configuration.
    - Improved the Multi-Point Routing feature by persisting the offset value when altering the slope controls.
    - Improved stability when using Trim and Extend on straight electrical ladder Fabrication Parts.
    - Added accelerator key to the Fabrication Part and Multi-Point Routing ribbon buttons.
    - Added a tooltip to the MEP Fabrication Part buttons for blocked content.
    - Improved the accuracy of MEP Fabrication auto length straights.
    - MEP Fabrication parts user interface removed when set to hidden in the Revit options.
    - Fixed an issue in which the Multi-Point Routing tool failed to start using the ribbon button after switching service.
    - Improved stability when cutting into MEP fabrication parts.
    - Improved the behavior of pattern 2966 so that it can be used as a tee in auto-fill scenarios.
    - Improved the behavior of connected variable angle bends to maintain a valid connection through angle changes.
    - Improved insulation carry-over values when starting the Multi-Point Routing tool from a straight's connector.
    - Improved stability when accessing the part editor while using the Multi-Point Routing tool.
    - Added support for inheriting service conditions when starting Multi-Point Routing from an open connector.
    - Improved the fabrication workflow by disabling the Multi-Point Routing tool when all valid straights are excluded or absent from the current service.
    - Improved the Multi-Point Routing tool by adding checks to maintain shape when crossing size conditions.
    - Improved the accuracy of snapping to avoid unintentionally picking model detail when using the Multi-Point Routing tool.
    - Improved the tap and reducer scenarios for some services when using the Multi-Point Routing tool.
    - Improved the display of electrical cable tray when placed part-by-part.
    - Improved the display of the MEP Fabrication Part Browser when it is launched during a Route and Fill command.
    - Improved the MEP fabrication auto-fill features to give preference to in-condition taps when filling tee scenarios.
    - Added feedback when attempting to apply a slope to a single MEP fabrication part.
    - Fixed an issue with the Multi-Point Routing tool that caused the angle tracking line to reference an absolute position after changing the offset.
    - Improved the Multi-Point Routing tool to obey connectivity rules when placing MEP fabrication parts.
    - Improved the MEP fabrication auto-fill features to warn when invalid fittings are being selected when teeing into straights.
    - Improved the MEP fabrication auto-fill features to give preference to in-condition taps.
    - Improved the behavior of angle dimensions when using the Multi-Point Routing tool.
    - Enabled consistent behavior across Fabrication Part categories when creating assemblies.
    - Improved the user interface by adding the MEP Fabrication Part Browser to the right-click context menu.
    - Improved the MEP Fabrication Part Browser for use with high DPI monitors.
    - Improved the Multi-Point Routing button on the Fabrication Part Browser so that it shows the command state by properly highlighting the button.
    - Fixed an issue that caused the product entry of fittings to display as blank in the Properties palette.
    - Improved stability when deleting a fabrication part coupling.
    - Improved stability when using the Change Size command while working with MEP fabrication pipework.
    - Improved the behavior of pipe taps to maintain the original size after placement.
    - Fixed an issue that could occur when changing the service group and size from round to rectangular in a plan or elevation view.
    - Added support for exporting assemblies through the Export to Fabrication addin.
    - Improved support for mechanical tees in MEP Fabrication autofill tools.
    - Improved the sticky move logic with Fabrication parts to reduce the amount of unwanted downstream propagation.
    - Fixed an issue that caused parts to fail to resize on optimized systems.
    - Improved take-off and cut-in support on pattern 2868.
    - Improved the export of MAJ files to retain project profiles.
    - Improved the behavior of blank end type connectors to block connections to other parts.
    - Added the ability to Multi-Point Route from a fabrication valve.
    - Improved in-canvas rotation for combo tees from disconnecting on sloped piping.
    - Improved the propagation of MEP fabrication parts when changing a branch offset from a rolled tee in the Properties palette.
  - Flex Pipe
    - Improved stability when a project contains a flex pipe that has lost its associated geometry.
  - Lookup Table
    - Improved stability when importing lookup tables into Revit families.
  - Linked Files
    - Improved performance when opening a file containing MEP fabrication hangers.
  - Lookup Table
    - Restored ability to use the number type parameter to define a lookup size table column.
  - Mechanical
    - Improved stability when connecting a rectangular branch to a main run in a section view.
  - Panel Schedule
    - Fixed an issue in the panel schedule template where a combined parameter is not removed when the project parameter is removed.
    - Improved stability when creating a panel schedule with corrupted data.
    - Fixed an issue where the sheet view is inconsistent with the panel schedule view if "Display multiple rows for multi-phase circuits" is unchecked.
    - Fixed an issue where the even circuit number can't be shown in a panel schedule when a two-column panel schedule template is set to Loads by Phase.
  - Phasing
    - Fixed an issue that occurred when drawing electrical wires that resulted in the deletion of project phases and of phasing information for elements.
  - System Inspector
    - Fixed issue in which pipe accessories and fittings added static pressure to the return system piping instead of subtracting static pressure.
  - Schedule
    - Fixed issues with key schedules by properly supporting the Space Type parameter and removing the following parameters from key schedules: Outdoor Air per Person, Outdoor Air per Area, Outdoor Air Information, Air Changes per Hour.
- Structure
  - Beams, Braces
    - Improved stability when getting symbol data.
    - Improved stability when manipulating framing elements that contain copes.
  - Rebar
    - Fixed an issue where the value of the rebar partition parameter was deleted when upgrading from Revit 2017 and earlier projects.
    - Fixed an issue when editing free-form rebar sketches.
    - Fixed a case where having rebar visible in perspective views would generate incorrect results.
    - Fixed a performance issue that could appear when placing spiral bars.
    - Improved the behavior of circle rebar.
    - Fixed an issue that could appear when editing a rebar family.
  - Reinforcement
    - Improved stability in certain instances when snapping shape-driven rebar to free form rebar.
    - Fixed an issue in the rebar constraint manager in which the host cover check box was visible for hosts without a cover.
    - API: Fixed an issue to filter rebar handles that have an undefined type when using the Calling getAllHandles() function.
    - Fixed an issue in the graphical rebar constraint editor to remove the host cover check box for invalid handles.
    - Fixed an issue in which concrete cover reset to the default value when upgrading Revit 2017 or earlier projects.
    - Fixed an issue where the tag on a rebar set with bars of the same length, but with the type set to varying, would disappear when editing the layout.
    - Fixed a performance issue that could appear when placing spiral bars.
    - Improved stability when dragging the grip of a T3 rebar shape from a 3D view set to the top.
    - Improved stability when selecting rebar placed in an element with no cover.
    - Fixed an issue that could appear when editing a rebar family.
  - Structural Connections
    - Fixed a crash that could occur when two users edit the same steel connection in worksharing mode.
    - Fixed an issue that prevented the clip angle connection from displaying in the appropriate plan view.
    - Fixed an issue of disappearing dimensions for detailed steel connections.
    - Fixed an issue that could lead to project corruption when adding or modifying structural connections in a multi-user project.
- API
Improvements (List of smaller improvements which may not be explicitly mentioned within the Revit 2019 Online Help)
- "Incorrect entered value. Modifier completely cuts the geometry of its host" message appears when the angle of the shorten modifier cuts the beam completely.
- "Incorrect entered value. Modifiers completely remove its host geometry" warning message appears when the length of the cut is bigger than the length of the beam. Please see attached picture.
- API `Autodesk.Revit.Creation.Document.NewTag` is removed.
- Added a validation for asset property list properties.
- Added bounds validation when editing an asset property.
- Added code snippets showing how to edit materials and connected assets.
- Added edition of AssetPropertyList in API
- Added measures to support the ability to edit the work plane when creating a plate.
- Added new method AssetProperty.GetSingleConnectedAsset()
- Added support for changing the service and/or size of connected MEP Fabrication systems.
- Added support for exporting MEP Fabrication parts to a .MAJ through the API to improve manufacturing workflows.
- Added support for swapping MEP Fabrication couplings in the Type Selector.
- Added the API RevitLinkType.GetLinkedFileStatus() to determine whether a Revit link is loaded, unloaded, or missing.
- Added the Edit System button to the contextual tab when a parallel pump set is selected.
- Added the ability for IFC export to include 2D space boundaries for room-bounding columns.
- Added the ability to host rebar in elements that are modeled using in-place bridge categories in the API.
- Added the ability to organize schedules and quantities in the Project Browser.
- Added the ability to populate a varying rebar set along a surface (arc/spline) in a group.
- Added the ability to set a schedule to not export to IFC when the IfcExportAs shared parameter for the schedule is set to "Don't Export".
- Added the ability to use IfcExportAs shared parameters to export Mullions as any other supported IFC entity.
- Added the ability to use the Type Selector to change fabrication steel elements to other elements, such as concrete.
- Added validation for APropertyEnum and APropertyInteger associated with a choice list.
- Changed the warning text to detail better the cause of the invalid situation.
- Cut and Paste of lazy dimensions on steel connection works.
- Disabled the ability to create a pattern named "No Pattern" in the Fill Patterns dialog.
- Enabled the graphical controls in the rebar sketch editor for free form rebar.
- Exposed a new method isValidValue for Asset Properties in API.
- Fixed an issue in which material volume did not update after a structural element is modified with shorten, cope and contour features that are placed on the element.
- Fixed an issue that could occur when changing a rebar shape from T2 to T3.
- Fixed an issue with the selection of the current pattern in the Visibility/Graphics dialog.
- Fixed the Override button in the Properties Panel Visibility/Graphics Override dialog so that it displays correctly when a Transparency or Hidden Pattern override is selected.
- Improved PCF output to report the material specification.
- Improved error message when Config Sync fails
- Improved filtering of connections in type selector
- Improved step down connectors to use liner thickness to drive the step down amount.
- Improved the Color fill dialog by making it resizable.
- Improved the Edit System tool by not allowing the selection of fully connected in-line pumps when adding elements to the system.
- Improved the PCF output by adding support for the elbow/bend angles.
- Added support for user defined notes in the PCF output.
- Added support for Instrument angle parts in the PCF output file
- Improved the PCF output to group together similar part types so material lists are cleaner.
- Improved the additional parts feature by restricting removal of parts from services when the parts exist in the model.
- Improved the autofill features by improving support for directional services.
- Improved the experience of renaming views so that users can choose whether to rename corresponding views each time.
- Improved the fabrication reports feature by adding the ability to print and preview holes on reports.
- Improved the grouping of MEP Fabrication context ribbon buttons.
- Improved the multi-point routing feature by adding a warning message when attempting to connect to out of condition parts.
- Improved the multi-point routing feature by improving support for tee junctions.
- Improved the pipe sizing feature by basing the size of a single pipe attached with taps or analytical pipe connections on the worst case.
- Improved the reload configuration feature by adding support for updating custom data to existing fabrication parts.
- Improved the user interface around the step down connector type.
- Replaced Application.Assets property by new method Application.GetAssets(AssetType).
- Steel elements were added as subcategories in the Filter menu.
- Updated "Tab switching behavior" to "Ribbon tab switching behavior" in Options dialog > User Interface section.
- Updated rise and drop symbols for ducts to include filled symbols for Wye and Reverse Wye.
- Updated the Scope Box drop-down list in the Properties Panel to display the scope boxes in alpha-numeric order.
- Updated the reporting of analytical pipe connections to report as analytical connections instead of pipes in the pressure loss report.
- Updated tooltips for mechanical sets to display additional information as can be seen in the properties palette.
- Added connection to Next Gen BIM 360 for cloud worksharing, which allows flexible access permissions for cloud workshared models within the same project.
- Added support for changing service and/or size on MEP Fabrication parts.
- Improved the offset tag to use the string defined in the centerline duct settings.